operating
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| operating [2025/02/17 19:54] – [EQ Settings] msebborn | operating [2025/02/18 22:05] (current) – [Gain settings] msebborn | ||
|---|---|---|---|
| Line 59: | Line 59: | ||
| |4|Adjust the Gain using the Gain Knob to get the required input level (a) - do this either by ear or using the input meter on the display| | | |4|Adjust the Gain using the Gain Knob to get the required input level (a) - do this either by ear or using the input meter on the display| | | ||
| |5|Repeat for all other inputs| | | |5|Repeat for all other inputs| | | ||
| + | |||
| + | Note: During this stage, you can select which channels need Phantom Power - press the 48V button to switch it on (button illuminates when on). | ||
| + | |||
| + | The " | ||
| ==== EQ Settings ==== | ==== EQ Settings ==== | ||
| Line 71: | Line 75: | ||
| * Select the channel you want to assign the EQ to | * Select the channel you want to assign the EQ to | ||
| - | * On the menu area, ....... | + | * On the menu area, select the Library button. Along the left hand side of the screen, select the elements to be loaded (Usually just Equaliser) |
| + | * Scroll down the list of options to find the nearest instrument / voice and load | ||
| + | * Adjust to suit the actual input, eg if you have loaded the Female vocal, adjust the low level cut to a lower frequency. | ||
| Line 86: | Line 92: | ||
| To add an effect to a channel: | To add an effect to a channel: | ||
| - | - Select the channel to apply the effect to | + | |Select the channel to apply the effect to| | |
| - | - Adjust the Bus Sends 13 & 14 which are predefined with effects (14 has Reverb) | + | |On the Bus Sends area, select the 13-16 bank by pressing the lowest button \\ Note: 9-12 is shown selected in the image|{{:: |
| + | |Adjust the Bus Sends 13 & 14 which are predefined with effects (14 has Reverb) | ||
| Note: add a Mute button to Bus Sends Ch 13 & Ch 14 to switch off effect, by: | Note: add a Mute button to Bus Sends Ch 13 & Ch 14 to switch off effect, by: | ||
| Line 93: | Line 100: | ||
| * Select "Bus Master" | * Select "Bus Master" | ||
| * Select "Mute Group" | * Select "Mute Group" | ||
| - | * Press and hold a Mute button, say " | + | * Press and hold a Mute button, say " |
| * Unselect the "Mute Group" button | * Unselect the "Mute Group" button | ||
| Line 104: | Line 111: | ||
| ==== Things that may turn up ==== | ==== Things that may turn up ==== | ||
| - | |Adjusting monitor mix| | | + | |Adjusting monitor mix|This is done in a similar manner to the effects, except select the Bus Masters 1-4; select the channel and then turn the knobs which are then used to dial the channel into the monitor mix bus.| |
| |Adjusting the performance mix| | | |Adjusting the performance mix| | | ||
operating.1739822042.txt.gz · Last modified: 2025/02/17 19:54 by msebborn