This is an old revision of the document!
Table of Contents
Suggested Operating Procedure
Setting Up the S16 Digital Snake
Steps
If using the S16 Snake, set this up first. The stages are:
- Set the S16 in position
- Add ethernet link
- Connect the inputs and outputs
- Configure the link
Sound Check
Connect the inputs to the X32 Desk / S16 Snake, plus main and monitor speakers. Suggested Setup
Display setup
The small LCDs on each channel can be configured to display the function associate with them, eg the inputs can be set to say things like “Vocal”, “Guitar”, etc and also display an icon associated with the item. The colour of the display can also be changed to help differentiate different items, eg make all vocal mics green, guitars blue, keyboards yellow.
The procedure to set up the display is:
| Step | Description | Notes |
|---|---|---|
| 1 | Press “Setup”, and scroll to the Scribble Strip page. | |
| 2 | Select the channel / bus you want to configure, and then select the colour, icon and enter the name. | Choose your own colour scheme and stick to it, making it easier to spot when working live. |
| 3 | It is recommended that any unused channels have the display set to black, so that they are not a distraction |
Mute Groups
There are 6 buttons in the Mute Group area, which can be set to mute selected channels, eg mute all instruments, mute all except house mic, mute effects, etc.
| Step | Description | Notes |
|---|---|---|
| 1 | Select the “Mute Group” button on the display area (Area D) | |
| 2 | Press and hold a Mute Group button, and then select the channel to mute by pressing the relevant “Select” buttons | |
| 3 | Repeat for other Mute Group buttons | |
| 4 | Deselect the “Mute Group” button on the display area (Area D) |
Suggested configuration
| Mute group | Channels muted | Description |
|---|---|---|
| 1 | Mute all instruments, NOT microphones | Useful between songs for tuning / instrument changes, etc |
| 2 | ||
| 3 | Mute all except house music | |
| 4 | ||
| 5 | Mute All | Used to mute ALL inputs |
| 6 | Mute effects | Used to turn off effect between songs |
Gain settings
The first stage is to set up the gain and settings for each input channel.
| Step | Notes | |
|---|---|---|
| 1 | Press the View button in the Config/Pre-amp area to bring up the relevant screen (b) |  |
| 2 | Select the input channel you want to set up. Make sure you are on the right Channel set, ie 1-16 or 17-32, by pressing the relevant button next to the sliders | |
| 3 | Move the channel slider to Unity / zero | |
| 4 | Adjust the Gain using the Gain Knob to get the required input level (a) - do this either by ear or using the input meter on the display | |
| 5 | Repeat for all other inputs |
Performance
Assuming a single act…
Things that may turn up
| Adjusting monitor mix | |
| Adjusting the performance mix |